OMAHA AMPHIBIA ROCKBOOT
Omaha Amphibian technical rockboot built in technical tissue with reinforced seams and loops. Must be used over the neoprene shoe applied to dry suits.
KNIFE GR UEI
The TDS GR UEI knife is a diving knife built with the robustness necessary for the most demanding jobs and responding to all the circumstances in which it is necessary to use it. Extended in military use, it has a design similar to that used by professional divers, but with a blade length of 10cm which makes it more manageable and with the flat tip.
HD13 HYDRAULIC HAMMER DRILL
13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere
BYLOT WETSUIT 7 MM
tds bylot abadon wetsuit 7 mm: tds bylot abadon 7 mm wetsuit, made of super elastic neoprene with sealed seams and reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.
HSE PANEL 2 DIVERS (PORTABLE/FRAME MOUNTED), NO...
Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.
TITANIUM LINE CUTTER
Line cutter made of the best Beta Titanium alloy, with an abrasion resistance 5-6 times higher than other titanium alloys. Side aperture for cutting thick ropes or cords more easily.
ABADON WETSUIT 5 MM
Tds abadon 5 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.
JET FIN MSP
TDS Jet Fin MSP belongs to the tactical-military range, tested by different armies and special forces. Jet Fin type rubber fin "long" with traditional design, also available to technical and sport divers, as well as professional divers, looking for a powerful and immediate response fin. Made of 100% rubber, it offers a very high durability over time as well as resistance in the worst conditions.
SVALBARD THINSULATE THERMAL UNDERWEAR
The Svalbard undergarment from TDS has been made with the best current thermal protection material: Thinsulate. Lightweight and elastic, the Svalbard offers a very comfortable fit thanks to an elaborate pattern, as well as being the ideal complement to any dry suit.
STAINLESS STEEL SCISSORS
Robust tds scissors in stainless steel, to act as a cutting element quickly and safely. With his microdentate sheet, it acts on most materials effectively. Indispensable in the technical diving, cave divind and for aquatic rescue teams
DC18 DISC SAW DOA
The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.
AS23 HYDRAULIC GRINDER DOA
AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.
THERMODIVE UNDERSUIT SHIRT
Thermodive Undersuit Shirt are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The shirt has clasps in the cuffs specially designed so the shirt can be worn without the sleeves bunching up and they do not interfere the cuffs sealing
KV19 BREAKER DOA
KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.
THERMODIVE UNDERSUIT PANTS
Thermodive Undersuit Pants are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The trousers have clips at the end of the legs to prevent them from bunching up when the user inserts their legs into the dry suit and also has a drawstring in the waistband
OMAHA ZERO BOOT
Robust and equipped with a reinforced sole, the Omaha Zero TDS Boot is designed for use with drysuits provided with a sock-shaped foot and has a whole series of technical characteristics allowing it to perform its function perfectly.
JET FIN SPRING (Unit)
Stainless steel spring for jet fin fins type . The adjusto to the fin is made by a stainless steel screw with security nut. Add strength, durability and safety to the fins
X-VISION HD VIDEO SYSTEM
The X-Vision CCTV System by Casco Antiguo is a compact HD video system, ideal for very commercial diving operation, it is made for the toughest and most demanding jobs. It allows to monitor and record up to 4 divers simultaneously. The brightness of the SHARK LIGHT can be adjusted on demand from the surface X-Vision Panel.
FOCO SHARK LIGHT LED
The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.
SRP PANEL 3 DIVERS IMCA
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.
SRP 2 DIVERS PANEL IMCA
Synergy designed diving SRP's are one of our popular products and have been very well received in the diving industry. Manufactured with a stainless steel frame, 4 x 50 ltr x 200 bar lightweight carbon composite cylinders, all connected to an air management panel and the two diver panels for diver air supply and cylinder charging.
copy of SRP 3 Buzos IMCA
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.